How to Read a Forklift LP or propane Bottle Gauge
Forklift operators must understand some safety considerations when figuring out how to read a forklift propane bottle gauge. Operators should know when the forklift is low on fuel or propane. Some kinds of forklifts which are older are designed so that the forks lower to the ground slowly and the machinery automatically shuts off when it is out of fuel. This is very not sage and could lead to personal injury and product damage. Newer models are designed differently to avoid this from occurring. The driver can operate a handle which stops the forks from falling when the propane runs out.
1 Make certain you know where the propane gauge is situated. Forklift propane gauge are a lot like a car's gas gauge. It is a small round object situated either on the propane tank's valve or on the forklift dash where the rest of the gauges and controls are located.
2 Make certain to keep the cover of the gauge clean so that information behind the glass is readable.
3 Look for the indicator needle at the bottom of the gauge. This needle shows you how much fuel is still in the propane tank.
4 On the gauge: F represents full and E represents empty. When the needle arm points at the letter E, it means that the propane tank is completely empty. When the needle arm arrives at the letter F, it means that the propane tank is completely full.
5 Notice the line in the middle of the gauge. When the needle touches the halfway line it would mean the tank is half full of propane.
6 Normally, there are smaller lines midway between the middle lines. These lines indicate quarters. When the needle points at the quarter mark closest to the F, it will mean that there is three-fourths of a tank remaining. When the needle arrives at the quarter mark closest to E, the tank is one-fourth full.