In nearly all cases, most individuals spend quite a bit of money buying their forklift. Thus, it is very important to take good care of it so as to protect your investment well into the long run. It is really a good idea to know the procedures that are carried out in the care and maintenance of this piece of equipment.
By starting up the forklift and listening closely how it works is among the best ways to tell how good the engine is working. Like for example, if there are any misses or knocks, the equipment is faulty and this must raise several issues. Also listen carefully for any squealing noise that come from the belts since these sounds would provide you with a wealth of information.
Several of the main components needing attention during maintenance consist of the horn, safety warning devices, gauges, the overhead guard and the lights. Any faulty parts or burnt out light bulbs must be replaced as soon as they are noticed. It is also imperative to check the wiring.
The battery compartment terminals must be cleaned when the above components have been checked carefully. If the terminals are not clean, be sure to clean them well. Each cell of the battery has to be inspected in order to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and then change the filters. The transmission filter, fuel filters and the hydraulic filter must be frequently replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
When the oil change is finished and the filters have been replaced, a visual inspection of the drive axle needs to be performed. If there is a grease fitting on the axle make sure to apply some grease. Check the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. After that, inspect each and every other part of the machine including the wheels. If any type of concern or fault is detected, be sure to deal with it immediately in order to make certain the machinery is running at its safest and optimum levels.